Start with your buyer requirements

Before comparing sizes, write down:

• Application: carpentry, sheathing, construction assembly, furniture work or repair.
• Substrate: what material is being fastened, and how thick it is.
• Driving method: pneumatic nail gun, electric nail gun or hammer, and the exact tool model.
• Environment: indoor, humid or outdoor exposure.
• Finish requirement: whether the nail head must sit flush or be countersunk.
• Commercial terms: quantity, packaging, target market requirements and delivery schedule.

The published product information covers the first five points. It does not cover the commercial terms, so you will need to request those directly.

Published parameters at a glance

Selection criteria

1. Substrate fit

The ST Series is listed for wood, plywood and soft materials. According to the product description, the sharp tip is meant to reduce splitting and the need for pre-drilling. If your job involves hard, dense or non-wood substrates, the published material does not show that this nail suits them. Ask the supplier before you specify it.

2. Size and length

The range runs from ST18 to ST64, with lengths from 18mm to 64mm. Choose the size based on the thickness of the material being fastened and the holding depth your project needs.

3. Tool compatibility

The product is described as compatible with pneumatic and electric nail guns as well as hammers. The supplier says it works with "most" driving tools, not all of them. Confirm fit with your exact nail gun model, magazine type and collation format before ordering in bulk. Collation details are not included in the published parameters.

4. Head style and surface finish

The flat head is designed to sit flush or countersunk, which suits work where a clean visible surface matters, such as furniture and decorative carpentry.

5. Corrosion and environment

The nails are described as treated for corrosion and wear resistance, and as intended for humid or outdoor conditions. The published material does not name the coating type or give test results such as salt-spray hours. For outdoor, coastal or chemically exposed projects, ask for the treatment specification and any test documentation.

6. Load-bearing use

The description mentions use in both decorative and load-bearing installations. Where nails form part of a structural design, follow your local building codes and engineering requirements. Ask for documented strength data rather than relying on general product descriptions.

When ST Series Straight Nails may not be the right choice

• Substrates outside wood, plywood and soft materials, unless the supplier confirms suitability.
• Projects that need fasteners longer than 64mm or shorter than 18mm.
• Projects that need certified fasteners, documented corrosion ratings or verified load values, until those documents are supplied.
• Tools whose collation or nail format has not been confirmed against this product.

What to confirm with the supplier

The product information does not include prices, minimum order quantities, lead times, certifications, shank diameters, collation types or coating specifications. Ask Hebei Lianshi Furniture Hardware Co., Ltd. for these details for the sizes and quantities you need, and request samples so you can test them with your own tools and materials.

Summary

ST Series Straight Nails are described as treated-steel, flat-head straight nails in sizes from ST18 to ST64 for carpentry, sheathing and DIY work in wood, plywood and soft materials. They suit buyers who need a flush finish and can drive the nails with nail guns or hammers. Check the substrate, length, tool fit and environment against your project, and get any missing technical or commercial documentation before you commit to a volume order.